Serving the Atlanta area  ·  (470) 944-1289  ·  Open Mon-Sun 7am-7pm
📞 (470) 944-1289 Free Quote

Metal Roofing in Alpharetta, GA (30009) · Local Professionals

Atlanta Metal Roofing · Fast response in Alpharetta and the Atlanta area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Alpharetta's 1990s and 2000s brick-and-siding subdivisions are hitting that first big roof replacement right now, and a lot of homeowners around 30009 are deciding between another shingle layer and a metal roof that will outlast the mortgage. From the rolling lots near North Point Mall to the tree-heavy streets off Haynes Bridge Road, we see the same story: original shingles are curling, granules are gone, and the next hailstorm is going to find every soft spot.

We are Atlanta Metal Roofing, and we work Alpharetta every week. Whether you are in a two-story traditional off Windward Parkway or a ranch closer to downtown Alpharetta, we know how the afternoon storms come through, how the pines drop limbs, and how HOA design review works in the bigger communities here. Call (470) 944-1289 and we will come look at your roof for free.

Metal Roofing in Alpharetta (30009)

Alpharetta sits on the rolling Piedmont at about 1,000 feet, and that means most lots have some grade to them, with red clay underneath a thin layer of topsoil. When we tear off a roof here, we are often dealing with downspouts that dump onto a slope and water that wants to run back toward the foundation. We plan the flashing and gutter work around that, especially on the brick-and-siding subdivisions built between 1990 and 2010 where the original roof is now 20 to 30 years old and the underlayment is tired. The dense canopy of pine, oak, and tulip poplar is another local factor. It is beautiful until a limb comes down or the needles pack into the valleys and hold moisture. Standing seam and stone-coated steel have become the popular upgrades here because they shed that debris and hold up to the summer sun and the occasional ice storm that pushes through north Fulton County.

Our team has installed, repaired, and replaced metal roofs across Alpharetta and the surrounding Atlanta area, from the older ranch homes near downtown Alpharetta to the newer large subdivisions out toward Milton and Roswell. We pull permits with the City of Alpharetta, coordinate with HOA architectural review when your community requires it, and make sure the panel profile and color meet the local rules before we order materials.

Our services in Alpharetta

How a Job Works in Alpharetta

Step 1: You call (470) 944-1289 or send us a message, and we set up a free on-site assessment. We get up on the roof, check the decking, flashing, and existing layers, and talk through what you are seeing, from a stain on the ceiling to granules in the gutter. We leave you a written estimate with the scope and the price, no pressure.

Step 2: Once you approve, we handle the permit with the City of Alpharetta and any HOA paperwork your subdivision requires. On install day we protect the landscaping, stage materials where the truck can reach, and keep the crew moving. Alpharetta lots can be tight, especially in the older parts of town, so we plan access before the dumpster shows up. We also watch the weather, because a summer afternoon thunderstorm can roll in fast and we do not leave an open roof exposed.

Step 3: Cleanup is part of the job. We magnet-sweep the driveway and lawn for screws and metal shavings, haul away the old material, and walk the property with you. We do not leave until you have seen the finished roof, the flashing details, and the gutters, and you know exactly what we did.

Pricing in Alpharetta depends on the size and pitch of your roof, how many layers are coming off, the condition of the decking, and how tight the access is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney or skylight work at $600, and gutters for metal roofs at $9 per linear foot. We give free estimates, so call (470) 944-1289 and we will put real numbers on your specific roof instead of guessing.

My subdivision off Windward Parkway was built in the late 1990s and the original shingles are done. Is a metal roof over the existing shingles a good option here?
It can be, if your roof has only one layer and the decking is solid. A retrofit saves the tear-off cost and gets you into a standing seam or stone-coated steel roof without the mess of removing the old shingles. We check the code limit on layers, inspect the decking through the attic, and confirm your HOA allows the panel profile and color before we recommend it. If the decking is soft or the flashing is failing, a full replacement is the better call, and we will tell you that straight.
A storm just took off some shingles and we have water coming in near Haynes Bridge Road. How fast can you get out?
We prioritize active leaks and storm damage in Alpharetta. Call (470) 944-1289 and we will get an inspection scheduled, often same day or next day depending on the storm volume. We can tarp the area to stop the water, document the damage for your insurance claim, and give you a repair or replacement estimate. We do not promise coverage, but we do provide the photos and paperwork your adjuster will ask for.
What does a typical metal roof cost for a 2,500 square foot house in Alpharetta?
For a house that size, a standing seam roof usually lands somewhere in the range of $25,000 to $35,000 depending on pitch, complexity, and whether we tear off the old roof. A stone-coated steel or metal shingle roof often comes in lower, and a corrugated panel roof lower still. Repairs are a different scale, starting at $450 for a leak repair. The only way to get a real number is a free on-site estimate, so call (470) 944-1289.
Do I need a permit from the City of Alpharetta to replace my roof?
In most cases yes, a full replacement or re-roof requires a permit, and the requirements and inspection process are set by the City of Alpharetta. We pull the permit for you and make sure the work meets the current code, including the limit on how many layers of shingles can be recovered over. If your home is in a historic district or your subdivision has an HOA, there may be design review as well, and we help coordinate that before materials are ordered.
My HOA requires architectural approval and my neighbor says my new metal roof will change the look of the street. How do you handle that?
We deal with Alpharetta HOA review regularly. Before we order panels, we get the approved colors and profiles from your architectural committee and submit the paperwork they require. On property lines, we keep the work on your side and follow the setback rules for gutters and overhangs. If a neighbor has a concern, we are happy to walk them through the plan so everyone knows what the finished roof will look like.
Are you insured for work on my Alpharetta property?
Yes. We carry general liability insurance and workers' compensation coverage. Our crew is covered, and we treat your home like it is our own.
What maintenance does a metal roof need in Alpharetta's climate?
Not much compared to shingles, but a yearly look matters here because of the pine needles and oak leaves. We recommend clearing the valleys and gutters each fall, checking the fasteners and seals on exposed-fastener panels every few years, and touching up any scratches before rust starts. The summer heat and humidity can feed algae and moss on shaded north slopes, so a quick wash or coating every several years keeps it looking sharp. We offer inspections and coating services if you would rather have us handle it.
Why choose us?

Trusted professionals in Atlanta

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Atlanta

All your work handled by qualified professionals in Atlanta

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Atlanta

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Atlanta · Response within 24h · No commitment · ☎ (470) 944-1289

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Atlanta ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm