Metal roofing prices in Atlanta vary based on factors like material type, roof size, and complexity of the installation. Whether you need a new installation, repair, or replacement, we provide transparent starting prices to help you budget with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Atlanta and the metro suburbs: panel systems engineered for humid summers, heavy downpours and storm wind, installed over high-temperature synthetic underlayment with proper attic ventilation, flashing and manufacturer-approved details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Atlanta homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as heat and humidity cycle the roof every day. Strong wind resistance and a finish that sheds pine needles and leaves. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of algae-streaked shingle, limb-damaged or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired where humidity has done its work, then a complete new metal system installed. Some insurers recognize impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Atlanta brick ranches and split-levels. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before summer downpours become interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and dormer transitions) and fixed right, not just caulked over. Emergency tarping available after thunderstorms. |
| Screw Replacement & Re-Fastening | From $750 | Atlanta's heat and humidity expand and contract metal roofs hundreds of times a year, so screws back out and aging washers crack on older exposed-fastener roofs. Oversized screws and weather-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for carports, sheds, barns and workshops across Metro Atlanta. Quality panels in durable colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Atlanta homeowners who want metal performance without the standing seam look. Lightweight and tough against hail and falling limbs. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: strong hail and wind performance, a fire-resistant surface, and profiles that mimic the slate and shake looks common on Atlanta homes, at a fraction of the weight. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, turrets, bay windows and full architectural roofs: premium metals that develop a living patina and hold up for generations in humid air. Custom fabrication for the fine details of Atlanta's older homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance coating systems that extend roof life 10-15 years, restore color and fight algae and humidity staining without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and brick transitions, the number one leak point on Atlanta roofs once the summer downpours arrive. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Debris-shedding valley, eave and ridge details for metal roofs: smooth metal valleys and screened gutter edges that let pine needles, leaves and limbs wash off under Atlanta's heavy tree canopy instead of holding moisture. Honest guidance on whether your roof needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and falling-limb storm damage to metal roofing: thorough documentation with photos, honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, algae and rust, coating wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles, guards that handle pine needles and leaves, and downspouts that carry sudden downpours away from brick walls and foundations on red clay lots. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Metro Atlanta, from horse farms and hobby barns in Canton and Newnan to suburban shops and warehouses, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and slope : Larger roofs require more materials and labor, increasing the total cost. Steeper slopes may require additional safety measures and time, affecting the price.
- Material type and gauge : Materials like copper or stone-coated steel cost more than corrugated panels. Thicker gauge metal offers better durability but adds to the material cost.
- Accessibility and roof complexity : Difficult access, multiple stories, or complex roof designs with many valleys and penetrations can increase labor time and cost.
- Additional services and repairs : Services like flashing repair, skylight repair, or snow guards add to the overall cost. Storm damage repairs may also require additional materials and labor.
What's included
- Travel included across the Atlanta area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, gather your roof dimensions, material preferences, and any specific concerns before calling. Our estimates include a detailed breakdown of materials, labor, and any additional services, with no hidden fees. Call (470) 944-1289 to schedule your free estimate and discuss your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to factors like material type, roof size, complexity, and local labor rates. For example, copper roofing costs more than corrugated panels, and a simple roof is less expensive than one with many valleys and chimneys. We provide transparent starting prices and detailed estimates to help you understand the costs.
Do you offer free estimates?
Yes, we offer free estimates for all our services. Call (470) 944-1289 to schedule an appointment at your convenience.
What payment methods do you accept?
We accept cash, checks, and major credit cards. We also offer financing options to help make your metal roofing project more affordable. Contact us at (470) 944-1289 for more details.