Serving the Atlanta area  ·  (470) 944-1289  ·  Open Mon-Sun 7am-7pm
📞 (470) 944-1289 Free Quote

Metal Roofing in Decatur, GA (30030) · Local Professionals

Atlanta Metal Roofing · Fast response in Decatur and the Atlanta area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Decatur's craftsman bungalows and 1950s brick ranches sit under a canopy of oaks, pines, and dogwoods that drop limbs and leaves on roofs every season. If you live near the Decatur Square or in neighborhoods like Oakhurst or Winnona Park, you already know that a roof here takes a beating from shade, storms, and time.

That's why homeowners in 30030 call Atlanta Metal Roofing. We understand the specific challenges of Decatur's older housing stock and mature trees, and we install, repair, and replace metal roofs that hold up to everything this city throws at them. From the tight lots near the MARTA tracks to the wide porches of the historic districts, we know how to work here.

Metal Roofing in Decatur (30030)

Decatur sits on the rolling Piedmont with red clay soil and a dense canopy that keeps roofs shaded and damp. That shade is beautiful, but it also feeds algae, moss, and rust, especially on older shingle roofs that are already past their prime. Many homes here are craftsman bungalows and brick ranches with low-pitch roofs, and the tree litter clogs gutters and traps moisture against fasteners. When we work in Decatur, we pay close attention to drainage and ventilation because the humid summers and heavy afternoon thunderstorms can turn a small leak into a big problem fast. Tight lots in neighborhoods like Oakhurst and College Heights mean we often have to plan carefully for staging materials and protecting landscaping. And on the steeper gables of older Victorians, we make sure flashing and seams are sealed tight against wind-driven rain.

Our team has years of experience serving Decatur and the surrounding Atlanta area. We've worked on everything from small porch roofs to full replacements on historic homes, and we know the local building department's requirements. If you're in a historic district, we can help you navigate the design review process so your metal roof meets the guidelines while still giving you the durability you want.

Our services in Decatur

How a Job Works in Decatur

Step 1: We start with a free on-site assessment. You call us at (470) 944-1289, and we schedule a time to inspect your roof, discuss your options, and provide a written estimate. We'll look at the condition of your current roof, check for leaks or damage, and talk through the best metal roofing solution for your home and budget.

Step 2: Once you approve the estimate, we handle the work. In Decatur, that often means coordinating with the city for permits and, if you're in a historic district, making sure the panel profile and color meet design review standards. We also plan for tight access on narrow lots and take care to protect your landscaping and gutters. Our crew is fully insured and follows best practices for installation, whether it's a new standing seam roof or a repair on an existing metal roof.

Step 3: After the work is done, we clean up thoroughly and walk the property with you to make sure you're satisfied. We haul away all debris and leave your yard as clean as we found it. We also provide documentation for insurance claims if needed, and we're happy to answer any questions about maintenance.

Pricing for metal roofing in Decatur depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. For a typical Decatur bungalow, a full replacement might range from $12,000 to $25,000, but we'll give you an exact quote after inspecting your roof. Factors like access, roof pitch, and the number of layers to remove can affect the final price. Call us at (470) 944-1289 for a free estimate.

My 1920s bungalow in Oakhurst has a steep gable and a porch roof. Can you match the metal roofing to the historic look?
Yes. We work with standing seam and metal shingles in colors and profiles that suit older homes. For historic districts, we can help you choose options that meet design review guidelines. We'll also pay attention to the porch roof and gable details to ensure a proper fit and finish.
A storm just knocked a limb onto my roof in Decatur. How quickly can you respond for emergency repair?
We offer free inspections for storm and wind damage and can often schedule same-day or next-day assessments. Call us at (470) 944-1289 to report the damage. We'll secure the area if needed and provide a repair estimate. We also help document damage for insurance claims.
What does a typical metal roof repair cost in Decatur, and what factors affect the price?
Most repairs start at $450, but the final cost depends on the extent of damage, roof accessibility, and the type of metal roof. Leak repairs, flashing fixes, and screw replacement are common. We'll give you a clear estimate after inspecting the issue.
Do I need a permit for a metal roof replacement in Decatur, and how do I find out about local rules?
Yes, roofing permits are typically required for replacements. The City of Decatur website (https://www.decaturga.com/) is the best place to start for permit information. We can guide you through the process and ensure your project meets local codes. Rules vary, so always verify with the building department.
My neighbor and I share a property line, and I'm worried about the roof overhang. What should I do?
Property line issues can be tricky. We recommend checking your survey and discussing any concerns with your neighbor before work begins. If you're in an HOA, review the architectural guidelines first. We can adjust the installation to respect property lines and HOA requirements.
Are you fully insured for roofing work in Decatur?
Yes, we carry general liability and workers' compensation insurance. We're happy to provide proof of insurance upon request. You can have peace of mind knowing your property and our crew are protected.
What maintenance does a metal roof need in Decatur's climate, especially with all the trees?
In Decatur, regular maintenance is key. We recommend cleaning gutters at least twice a year to prevent clogs from leaves and pine needles. Inspect for loose fasteners or debris after storms. A yearly inspection can catch small issues before they become leaks. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Atlanta

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Atlanta

All your work handled by qualified professionals in Atlanta

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Atlanta

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Atlanta · Response within 24h · No commitment · ☎ (470) 944-1289

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Atlanta ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm