Serving the Atlanta area  ·  (470) 944-1289  ·  Open Mon-Sun 7am-7pm
📞 (470) 944-1289 Free Quote

Metal Roofing in Roswell, GA (30076) · Local Professionals

Atlanta Metal Roofing · Fast response in Roswell and the Atlanta area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Roswell's mix of historic homes near the square and wooded subdivisions off Holcomb Bridge Road means one thing for roofs: trees and storms are always a threat. From the steep gables of Victorian cottages to the low-pitch ranches in Martin's Landing, every roof here faces falling limbs, summer downpours, and the occasional ice dam. We know Roswell because we work here, and we've seen firsthand how a metal roof can outlast the pine needles and hail that wear down asphalt shingles.

Homeowners in 30076 call Atlanta Metal Roofing because we understand the local building stock and the specific challenges of roofing in Roswell. Whether it's a historic home near the Roswell Mill or a newer build in Horseshoe Bend, we bring the right metal roofing solution that fits the neighborhood and the architecture.

Metal Roofing in Roswell (30076)

Roswell sits on rolling Piedmont terrain with red clay soil and a dense canopy of pine, oak, and tulip poplar. That canopy is beautiful, but it drops limbs and needles that clog gutters and trap moisture against roofing. Many homes in Roswell are 1990s to 2020s brick-and-siding subdivisions, but there are also older farmhouses and historic properties near the Roswell Historic District. The steep gables and complex rooflines of these homes require careful flashing and fastening. Metal roofing is an excellent choice here because it sheds debris, resists algae and moss, and stands up to the afternoon thunderstorms that roll through during summer. We've installed standing seam on porches and dormers, and corrugated panels on barns and workshops throughout the area. Our experience with Roswell's varied architecture means we can recommend the right profile and color to match your home's style and meet any historic or HOA requirements.

Our team has been serving Roswell and the greater Atlanta area for years, and we know the local building department's permitting process and inspection requirements. We also understand how to work with HOA design review committees to ensure your metal roof meets neighborhood standards.

Our services in Roswell

How a Job Works in Roswell

Step 1: Give us a call at (470) 944-1289 or fill out our online form to schedule a free on-site assessment. We'll inspect your current roof, discuss your options, and provide a detailed estimate. We'll also check for any signs of damage from falling limbs or storms.

Step 2: Once you approve the estimate, we'll schedule the work and handle the permitting with the City of Roswell. For homes in historic districts or HOAs, we'll coordinate design approval. On installation day, our crew will protect your landscaping and begin removing the old roof or installing the new metal roof over your existing shingles if eligible. We work efficiently to minimize disruption, especially on tight lots with mature trees.

Step 3: After installation, we clean up thoroughly, haul away all debris, and walk through the finished roof with you to ensure everything meets your expectations. We leave your property clean and your new metal roof ready to protect your home for decades.

Metal roofing costs in Roswell vary based on the material, roof complexity, and access. For a typical home, metal roof installation starts at $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repair jobs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Keep in mind that factors like roof pitch, number of stories, and the presence of skylights or chimneys can affect the final price. We provide free estimates so you know exactly what to expect. Call us at (470) 944-1289 to schedule yours.

My home in the Roswell Historic District has a steep gable roof. Can you install metal roofing that meets historic guidelines?
Yes, we have experience working with the Roswell Historic District guidelines. We can recommend metal shingles or standing seam profiles that mimic traditional materials and colors. We'll coordinate with the design review board to ensure approval before installation.
A storm just knocked a limb onto my roof in Roswell. How quickly can you respond for emergency repair?
We prioritize storm damage calls. Call us at (470) 944-1289 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp the area to prevent further damage and provide a repair estimate.
What's the typical cost for a metal roof on a 2,000 square foot home in Roswell?
For a 2,000 square foot home, a basic corrugated metal roof might start around $11,000 (at $5.50 per sq ft), while standing seam could range from $20,000 to $30,000 depending on complexity. We provide a detailed free estimate after inspecting your roof.
Do I need a permit from the City of Roswell for a metal roof replacement?
Yes, roofing permits are generally required for a full replacement in Roswell. We handle the permitting process for you, ensuring all inspections are passed. Requirements can vary, so we always verify with the local building department.
My HOA in Roswell requires approval for roof color. Can you help with that?
Absolutely. We can provide color samples and documentation for your HOA submission. We're familiar with many Roswell HOAs and can guide you through the approval process to ensure your metal roof meets community standards.
Are you fully insured for roofing work in Roswell?
Yes, we carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in Roswell's climate?
We recommend an annual inspection, especially after storm season. Pine needles and debris can accumulate, and fasteners can loosen over time. A yearly check helps catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Atlanta

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Atlanta

All your work handled by qualified professionals in Atlanta

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Atlanta

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Atlanta · Response within 24h · No commitment · ☎ (470) 944-1289

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Atlanta ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm