Serving the Atlanta area  ·  (470) 944-1289  ·  Open Mon-Sun 7am-7pm
📞 (470) 944-1289 Free Quote

Metal Roofing in Atlanta, GA (30314) · Local Professionals

Atlanta Metal Roofing · Fast response in Atlanta and the Atlanta area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Atlanta's housing stock is as varied as its neighborhoods, from the steep-gabled Victorians of Inman Park and Grant Park to the brick ranches of East Point and the sprawling estates of Buckhead. With a dense tree canopy of pines, oaks, and tulip poplars dropping limbs and needles year-round, and humid summers that push shingles past their prime, your roof takes a beating. That's why homeowners in ZIP 30314 and across the city call Atlanta Metal Roofing for installations, repairs, and replacements that stand up to Atlanta's weather.

We know the local challenges because we live and work here. Whether it's a leak after a thunderstorm in West End or a full standing seam install on a Craftsman bungalow in Candler Park, our team brings years of experience with Atlanta's unique mix of historic homes, tree cover, and storm patterns. When you need a roofer who understands your neighborhood, we're just a phone call away at (470) 944-1289.

Metal Roofing in Atlanta (30314)

Atlanta sits on the rolling Piedmont at about 1,000 feet, with red clay soil that holds water and a canopy of mature trees that shade your home but also litter your roof with debris. Older neighborhoods like Inman Park, Grant Park, and Cabbagetown feature 1880s to 1920s Victorians and Folk Victorian cottages with steep gables and porch roofs, while Virginia-Highland, Candler Park, and Kirkwood are full of 1910s-30s Craftsman bungalows and Tudor Revivals. Buckhead has large brick and stone estates with complex slate roofs, and areas like Decatur, Smyrna, and East Point have 1950s-70s brick ranches with low-pitch shingle roofs. Further out, Alpharetta, Roswell, and Marietta have newer subdivisions, and Canton and Newnan have barns and workshops with corrugated metal. Our crews are experienced with all of these, from standing seam in charcoal, bronze, or dark green on porches and dormers to exposed-fastener R-panel on barns and sheds. We also handle metal shingles in a slate look, stone-coated steel, and copper accents on bay windows and entries.

The local climate is tough on roofs: hot, humid summers feed algae, moss, and rust; afternoon thunderstorms bring hail, straight-line wind, and heavy downpours; and occasional ice storms test older roofs. We've seen it all, and we know how to install and repair metal roofs that hold up. Our team is fully insured with general liability and workers' compensation, so you can have peace of mind.

Our services in Atlanta

How a Job Works in Atlanta

Step 1: It starts with a free on-site assessment. We'll come out to your property, inspect your current roof, discuss your needs, and provide a detailed estimate. We'll also help you understand permit requirements, which you can verify with the City of Atlanta website (https://www.atlantaga.gov/), as rules vary by jurisdiction and historic districts may have design review.

Step 2: Once you approve the estimate, we schedule the work. Our crew arrives on time, protects your landscaping, and gets to work. In tight Atlanta neighborhoods, we plan for narrow lot access and coordinate with HOAs when needed. We handle the permit process and keep you informed.

Step 3: After the job, we clean up thoroughly, walk the property with you, and make sure you're satisfied. We leave your home clean and your new roof ready to protect you for decades.

Pricing for metal roofing in Atlanta depends on the job. For installation, standing seam starts at $10 per square foot, while corrugated and ribbed panel roofing starts at $5.50 per square foot. Metal roof replacement starts at $9 per square foot, and retrofitting over existing shingles starts at $7 per square foot. Repairs, including leak repair, start at $450, and screw replacement and re-fastening starts at $750. Flashing, chimney, and skylight repair starts at $600, and gutters for metal roofs start at $9 per linear foot. Factors like roof size, access, condition, and urgency affect the final price. Call us at (470) 944-1289 for a free estimate tailored to your home.

My 1920s bungalow in Grant Park has a steep gable and original shingles. Can you install a metal roof that matches the historic look?
Yes. We often work on historic homes in Grant Park, Inman Park, and similar neighborhoods. For a period-appropriate look, we can install metal shingles in a slate or shake profile, or standing seam in a color that complements the home's architecture. We're familiar with historic district design review requirements and can help you choose a profile and color that will pass muster.
A storm just knocked a limb onto my roof in West End. How quickly can you respond for emergency leak repair?
We understand that storm damage can be stressful. We offer free inspections for storm and wind damage and can often schedule emergency repairs quickly. Call us at (470) 944-1289 to discuss your situation, and we'll get a crew out as soon as possible to tarp or repair the damage and prevent further issues.
What's the typical cost to replace a shingle roof with metal on a 1,500-square-foot ranch in East Point?
For a 1,500-square-foot ranch, a metal roof replacement typically starts around $9 per square foot, so you might expect a ballpark range of $13,500 to $18,000, depending on the metal type, roof complexity, and whether we need to remove existing layers. We provide free estimates so you can get an accurate number for your specific home.
Do I need a permit to replace my roof in Atlanta, and how do I find out about historic district rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Atlanta and surrounding jurisdictions. Thresholds, fees, and inspection requirements vary, so it's best to check with the local building department. You can start by visiting the City of Atlanta website for general information. We can also guide you through the permit process and advise on historic district or HOA design review if applicable.
My neighbor's tree hangs over my property line in Kirkwood. Can I trim it, and will my HOA approve a metal roof?
Property line issues can be tricky. In Georgia, you generally have the right to trim branches that overhang your property, but it's wise to check local ordinances and talk to your neighbor first. As for HOA approval, many HOAs have design guidelines, so we recommend submitting your proposed metal roof profile and color for approval before installation. We can provide product specifications to help with the process.
Are you fully insured for roofing work in Atlanta?
Yes, we are fully insured with both general liability and workers' compensation coverage. We're happy to provide proof of insurance upon request so you can feel confident that your property and our crew are protected.
What maintenance does a metal roof need in Atlanta's humid climate and tree canopy?
In Atlanta, we recommend annual inspections to remove debris like pine needles and leaves, especially if you have overhanging trees. Check for loose fasteners, signs of rust, or damaged sealant around flashing. Keeping gutters clean is also important to prevent water backup. We offer maintenance plans and can perform inspections to catch small issues before they become big problems.
Why choose us?

Trusted professionals in Atlanta

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Atlanta

All your work handled by qualified professionals in Atlanta

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Atlanta

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Atlanta · Response within 24h · No commitment · ☎ (470) 944-1289

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Atlanta ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm